|
|
|
***
Note, if you don’t disconnect the battery and you insert the key to raise/lower the window while the airbag is removed, the airbag light may illuminate and will require a service visit to reset. It’s best to disconnect the battery, but I don’t... 
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world 
|
|
|
|
|
|
|
Contributed by: UCrewX5
MODEL
E39, 5 Series from 09/00 (without DSP, or Nav system)
E53, X5 vehicles from 10/00 (without DSP, or Nav system)
SITUATION
After installation of the BMW Bluetooth Phone System, the CPT 7000
|
Posted by UCrewX5
- Last Activity 01-09-2006 11:05 AM
by UCrewX5
|
|
|
|
|
|
|
BLUETOOTH INSTALL FOR X5 BUILT BEFORE 4/2002
PREWIRED FOR CPT PHONES WITH OPTION SA640A
|
Posted by UCrewX5
- Last Activity 01-09-2006 11:05 AM
by UCrewX5
|
|
|
|
|
|
|
Had a lot of spare time last night, so I fiddled with the secret menu in the check control system.
Push and hold the left dash button (system check). After about 10 seconds, a menu will appear. Using the info from Ajay's post a few days ago, I
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
Contributed by: Eric
Instructions for removal and
cleaning of MID (multi information display center)(the in dash unit
containg the speedometer and tachometer) to restore pixels.
1.Remove 2 screws above tach/speedo with a T10 torx driver.
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
How to Reset Service Interval Lights
For X5's produced from October/November 2000 and beyond:
1. Key in 0 or off position.
2. Press and hold odometer button and turn key to 1 or acc. position.
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
Reprogramming Key Fob on BMW X5 - E53
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
SR7 DIY X5 3.D ( Front radar and laser only)
1.Locate the best place for the radar & laser from detector. Open the hood and screw both parts on to the bumper.
2.Route the cables to the right via the space of the light up to the front.
|
Posted by MDEF
- Last Activity 01-09-2006 11:05 AM
by MDEF
|
|
|
|
|
|
|
Steps to hardwire a V1
|
Posted by Chris F.
- Last Activity 01-09-2006 11:05 AM
by Chris F.
|
|
|
|
|
|
|
Contributed by: statdoc
I spent the better part of a day installing two new garage door openers at my home, to replace two old ones. At the very end, I tried to program the HomeLink built-in transmitter in my BMW, to open the garage doors, without success. I followed the BMW Owners Manu
|
Posted by statdoc
- Last Activity 01-09-2006 11:05 AM
by statdoc
|
|
