Quote:
|
Originally Posted by nwizard
I've started today the installation DIY. The main issue I got - how to dissasemble the factory midbass... //Afraid to broke it. Aby suggestions ?
ps: the midranges are very impressive !  |
There are two plastic tabs that stick out over the front lip of the mid-bass drivers. You'll just need shave these tabs flush with a razor blade (quick but dangerous) or a file (slow and safe and recommended).
Then pry around the lip of the speaker to separate the glue holding the speaker to the housing.
Then flip the speaker housing upside down and tap the magnet with a hammer to break the speaker free, sometimes it takes a good wack to do the job.
Hope this helps and be careful shaving the tabs and don't cut yourself if you use a knife.